The C20 controller is a robust, brushless and sensor-less DC motor controller. Containing a J1939 compliant CAN transceiver it is able to accept
commands that define speed and direction of the motor. As well as communicate to the CAN bus; it's status, that is defined by "motor achieved speed"
compared to "motor command speed" and motor power. Built for a severe market, it can survive under hood conditions in applications such as;
agriculture, forestry, mining, and off highway. It is extremely fault tolerant.
Close loop control with temperature sensor or CAN (temperature sensor prioritized)
Configurable through CAN or EMP Service Tool
Fully protected (transients, short circuit, and reverse batter)
Full variable control through CAN
Behaves as on/off controller in absence CAN
SAE J1939 compliant
Size (L x W x H) - 5.03" x 5.64" x 2.36"
Weight - 2.4 lbs.
IP Rating - IP67, Submersible
Rated Voltage - 9 to 32 VDC
Rated Current - 20 amps continuous
Quiescent Current Draw (Ignition Off) - < 300 uA
Quiescent Current Draw (Ignition On) - < 200 uA
Operating Temperature - -40 to 105° C
Storage Temperature - -40 to 105° C
I/O Connector A (Mates with Deutsch DTM06-6S (E007))
I/O Connector B (Mates with Deutsch DTP06-4S (E003))
I/O Connector C (Mates with Deutsch DTP04-4P)
3 phase, variable speed BLDC drive
Control through CAN
Feel free to download the following informational product documents and guides. You may need to install Adobe Acrobat
Reader to view these documents. You can view more documents relating to this product in our Product
EMP has identified several markets for which its' products fit the application necessary within that market. Below
is a list of those markets that fit EMP's products including a brief description of that application.
Sorry, no markets have been loaded for this product.
The photo gallery is intended to showcase EMP's products in the field, being tested, or simply highlight the market
applications suiteable for that particular product.
Sorry, no photos have been loaded for this product.